RSX L4-2.0L (VTEC) (2002)
NOTE:
^
Identify parts as they are removed to ensure reinstallation in original location.
^
Inspect the rocker shafts and rocker arms.
^
The rocker arms must be installed in the same positions if reused.
^
When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs and rocker
arms on the shaft.
^
Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact points.
^
Bundle the rocker arms with rubber bands to keep them together as a set.
K20A3 engine