RSX L4-2.0L (VTEC) (2002)
Low Fuel Lamp/Indicator: Testing and Inspection
Low Fuel Indicator Light Test
1. Do the fuel gauge sending unit test.
-
If the system is OK, go to step 2.
-
If the system has any malfunction, repair it.
2. Turn the ignition switch ON (II) with the float at the E (EMPTY) position.
-
If the low fuel indicator light is on, go to step 3.
-
If the low fuel indicator light is not on, refer to the low fuel indicator Circuit Diagram and check the circuit.
3. Lift the float above the LOW position.
-
If the low fuel indicator light goes off, the system is OK.
-
If the low fuel indicator light is still on, refer to the low fuel indicator Circuit Diagram and check the circuit.