RSX L4-2.0L (VTEC) (2002)
12.
Remove the air fuel ratio sensor and the secondary heated oxygen sensor from the catalytic converter.
13.
Remove the catalytic converter, and install the new catalytic converter.
14.
Using new exhaust gaskets, nuts, and bolts, torque the self-locking nuts to 33 N.m (25 lb-ft) and torque the bolts to 22 N.m (16 lb-ft). Torque the
upper bolts in steps, alternating from side to side.
15.
Reinstall the air fuel ratio sensor and the secondary heated oxygen sensor. Torque both to 44 N.m (33 lb-ft).
16.
Reinstall the cargo area lining, the rear panel, and the rear bumper beam, absorber, and face.
Disclaimer