RSX L4-2.0L (VTEC) (2002)
Solar Sensor: Testing and Inspection
Sunlight Sensor Test
Turn the ignition switch ON (II). Measure the voltage between the terminals with the (+) probe on the No.1 terminal and the (-) probe on the No.2
terminal with the 2P connector connected. The voltage will not change under the light of a flashlight or a fluorescent lamp. Voltage should be:
-
3.6 - 3.7 V or more with the sensor out of direct sunlight.
-
3.3 - 3.5 V or less with the sensor in direct sunlight.