RSX L4-2.0L (VTEC) (2002)
Width of sealing ring groove
Standard or new
2.025 - 2.060 mm
Service limit
2.080 mm
Clutch feed pipe O.D.
Standard or new
7.97 - 7.98 mm
Service limit
7.95 mm
Clutch feed pipe bushing I.D.
Standard or new
8.000 - 8.015 mm
Service limit
8.030 mm
Countershaft
Diameter of needle bearing contact area
at torque converter housing
Standard or new
36.005 - 36.015 mm
Service limit
When worn or damaged
at 4th gear collar
Standard or new
37.980 - 37.994 mm
Service limit
When worn or damaged
Reverse gear
Standard or new
39.979 - 40.000 mm
Service limit
When worn or damaged
I.D. of gears
4th gear
Standard or new
43.000 - 43.016 mm
Service limit
When worn or damaged
End play of gears
5th gear
Standard or new
0.10 - 0.42 mm
4th gear
Standard or new
0.1 - 0.2 mm
Reverse gear
Standard or new
0.10 - 0.25 mm
4th gear collar length
Standard or new
24.00 - 24.05 mm
Distance collar length
Standard or new
74.25 - 74.30 mm
Reverse selector hub width
Standard or new
25.45 - 25.65 mm
Reverse selector hub O.D.
Standard or new
55.87 - 55.90 mm
Service limit
When worn or damaged