SLX V6-3.2L SOHC (1996)
Fuel Tank Unit: Service and Repair
FUEL GAUGE UNIT
Removal Procedure
1. Disconnect the negative battery cable.
2. Loosen the fuel filler cap.
3. Drain the fuel from the tank.
Tighten:
Tighten the drain plug to 20 N.m (14 lb. ft.).
4. Disconnect the wiring connector from the fuel gauge unit.
5. Remove the fuel gauge unit retaining screws.
6. Remove the fuel gauge unit.
^
Cover or plug the fuel tank to prevent dust, dirt, or debris from entering the tank.
Installation Procedure
1. Install the fuel gauge unit.
2. Install the fuel gauge unit retaining screws.
3. Connect the wiring connector to the fuel gauge unit.
4. Fill the fuel tank with fuel.
^
Tighten the fuel filler cap.
^
Check for leaks at the fuel gauge unit gasket.
5. Connect the negative battery cable.
