TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
Vanity Lamp: Testing and Inspection
NOTE: The illustration shows the driver's vanity mirror; the front passenger's vanity mirror is symmetrical.
1. Remove the two screws from the sunvisor bracket.
Vanity Mirror Lights Test
2. Disconnect the positive terminal, and remove the sunvisor.
NOTE: The switch is built into the vanity mirror.
Vanity Mirror Lights Test
3. Check for continuity between the terminals in each switch position according to the table.
Vanity Mirror Lights Test
4. If necessary, pry off the lens, and replace the bulb.