TL L5-2451cc 2.5L SOHC MFI (1997)
Air Door Actuator / Motor: Service and Repair
Mode Control Motor
1. Turn the ignition switch ON (II), then set the mode control switch on VENT. Turn the ignition switch OFF.
2. Remove the dashboard.
3. Disconnect the 7P connector from the mode control motor.
4. Unhook the clip from the mode control rod, then remove the three self-tapping screws, the mode control motor and the flange collars.
5. Remove the rod from the mode control motor.
6. Install in the reverse order of removal. After installation, make sure the mode control motor runs smoothly.
