acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Condenser HVAC|Service and Repair|Page 6019 > < Compressor Clutch Relay|Locations|Page 6015
Page 1
background image

Condenser HVAC: Service and Repair

1.  Recover the refrigerant with a Recovery/Recycling/Charging System.
2.  Remove the front grille.

3.  Remove the bolt, the reservoir hose bracket and the coolant reservoir.

NOTE: Do not disconnect the reservoir hose from the coolant reservoir and the radiator.

4.  Remove the power steering clamp and the wire harness clip from the condenser fan shroud. Disconnect the condenser fan connector. Loosen the

two lower mounting bolts, then remove the two upper mounting bolts and the condenser fan shroud.

NOTE: Be careful not to damage the radiator fins when removing the condenser fan shroud.

Condenser HVAC|Service and Repair|Page 6019 > < Compressor Clutch Relay|Locations|Page 6015