TL L5-2451cc 2.5L SOHC MFI (1997)
Evaporator Case: Service and Repair
Heater-Evaporator Unit Replacement
Evaporator case removal
1. Recover the refrigerant with a Recovery/Recycling/Charging System.
2. Remove the dashboard lower cover, the knee bolster and the glove box. Refer to Body and Frame - Interior Trim - Dash Board - Service and
Repair - Procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
3. Remove the ECM. Refer to Powertrain Management - Computers and Control Systems - Engine Control Module - Locations -
Components See: Powertrain Management/Computers and Control Systems/Powertrain Control Module/Locations/Component Locations
4. Remove the ABS control unit and the radiator fan control module together with the bracket, then remove the TCM. Remove the security control
unit. Refer to Brakes and Traction Control : Relays and Modules - Brakes and Traction Control : Electronic Brake Control Module :
Service and Repair : Procedures See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Electronic Brake Control
Module/Service and Repair
5. Disconnect the connectors from the power transistor, blower motor high relay, evaporator temperature sensor, blower motor and the heater
sub-harness, then remove the blower motor and heater subharness connectors from the brackets. Disconnect the passenger's airbag harness clip.
6. Remove the wire harness clips, the three self-tap- ping screws and the pipe cover.
