acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Heater Core|Service and Repair|Page 6132 > < A/C - Heater Blows Cold Air/A/C Blows Warm Air
Page 1
background image

Heater Core: Service and Repair

1.  Remove the heater unit.
2.  Remove the mode control motor.

3.  Remove the two self-tapping screws and the left heater duct.

4.  Remove the self-tapping screw and the left air duct.

5.  Remove the wire harness clips, and the mode control arm with a flat-tip screwdriver as shown. Remove the five self-tapping screws and the left

side cover.

Heater Core|Service and Repair|Page 6132 > < A/C - Heater Blows Cold Air/A/C Blows Warm Air