acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Heater Core Case|Service and Repair|Page 6136 > < Heater Core|Service and Repair|Page 6132
Page 1
background image

Heater Core Case: Service and Repair

SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS section before performing
repairs or service.

1.  Disconnect the negative cable from the battery.
2.  When the engine is cool, drain the engine coolant from the radiator.

Do not remove the radiator cap when the engine is hot; the engine coolant is under pressure and could severely scald you.

3.  Remove the mounting nut and the heater valve, then disconnect the heater hoses from the heater unit.

CAUTION: Engine coolant will damage paint. Quickly rinse any spilled engine coolant from painted surfaces.

NOTE: Engine coolant will run out when the hoses are disconnected; drain it into a clean drip pan.

4.  Remove the dashboard.

5.  Remove the seven mounting bolts and the steering hanger beam.

Heater Core Case|Service and Repair|Page 6136 > < Heater Core|Service and Repair|Page 6132