TL L5-2451cc 2.5L SOHC MFI (1997)
-If adjustment is required, go to step 2.
-If no adjustment is required, remove alignment equipment.
2. Hold the adjusting bolt on the rear lower arm A and loosen the self-locking nut.
3. Adjust the rear toe by turning the adjusting bolt until toe is correct.
4. Install the self-locking nut, and tighten it while holding the adjusting bolt.
TURNING ANGLE
NOTE: Use commercially-available computerized four wheel alignment equipment to measure wheel alignment.
1. Turn the wheel right and left while applying the brake, and measure the turning angle of both wheels.
Turning angle:
Inward wheel: 40°00' ± 2°
Outward wheel: 33°18' (reference)
2. IF the turning angle is not within the specifications, check for bent or damaged suspension components.
