TL L5-2451cc 2.5L SOHC MFI (1997)
Wiper Motor: Testing and Inspection
1. Open the hood, and remove the cap nuts and the wiper arms.
2. Disconnect the 5P connector from the windshield wiper motor.
Windshield Wiper Motor Test
3. Test the motor by connecting battery power and ground according to the table.
4. If the motor fails to run smoothly, replace it.
Windshield Wiper Motor Test
5. Connect an analog voltmeter between the No. 3 and the No. 5 terminals. Run the motor at low or high speed.
NOTE: "As" means Automatic stop
The voltmeter should indicate 0 V and 4 V or less alternately.
