acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest:|08-021|Page 29 > < Customer Interest:|08-021|Page 27
Page 3
background image

^

If you use an earlier HDS software version or AcuraLink Software Database, the iN workstation may show that the vehicle does not need an
update when it actually does.

^ The AcuraLink Software Database is part of the HDS software. Not all HDS software versions include a new database update. The AcuraLink

software IDs of the update in this bulletin are shown in the table in DIAGNOSIS. Note that the software includes two programs, the main program
(Camelot ID) and the subprogram (V850 ID).

^ For questions or problems with the AcuraLink update software, call the American Honda Special Tools hotline.

TOOL INFORMATION

iN Workstation (with the latest HDS software installed)

GNA600 Kit: P/N GNA600KIT

AcuraLink Reprogramming Cable Adapter 

(required for TL and MDX only):
P/N NUD420300H1P

NOTE:

^

The GNA600 kit (P/N GNA600KIT) and the AcuraLink Reprogramming Cable Adapter (P/N NUD420300H1P) have already been shipped to
your dealership.

^

Replacement kits (P/N GNA600KITA) do not include:

-

AcuraLink Reprogramming Cable Adapter (required for TL and MDX only):

P/N NUD420150H1P

-

256 MB PCMCIA Memory Card:

P/N SSDP25M3012

^

The GNA600 kit, the AcuraLink reprogramming cable adapter, and the memory card are available through the Acura Tool and Equipment
Program. Call.

^

For questions or problems with the GNA600, call the American Honda Special Tools hotline.

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

010306

Flat Rate Time:

0.9 hour

Failed Part:

P/N 39820-SJA-A52

Defect Code:

03214

Symptom Code:

01201

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

1. Check the current Camelot and V850 software versions in the AcuraLink (HIP) control unit:

^

Turn the ignition switch to ON (II), then select OK to accept the navigation system disclaimer.

Customer Interest:|08-021|Page 29 > < Customer Interest:|08-021|Page 27