TL V6-3.5L (2007)
Ignition Relay: Testing and Inspection
Power Relay Test
Power Relay Test
Use this chart to identify the type of relay, then do the test listed for it.
NOTE: For the turn signal/hazard relay input test. See: Lighting and Horns/Testing and Inspection/Turn Signal/Hazard Flasher System/Turn
Signal/Hazard Relay Input Test
Normally-open type
Check for continuity between the terminals.
-
There should be continuity between the No. 1 and No. 2 terminals when power and ground are connected to the No. 3 and No. 4 terminals.
