TL V6-3206cc 3.2L SOHC MFI (1998)
Clutch: Service and Repair
Assemble
NOTE:
-
Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air.
-
Blow out all passages.
-
Lubricate all parts with ATF before assembly.
1. Inspect the check valve; if it's loose, replace the piston.
2. Be sure that the 1st clutch piston disc spring is securely staked.
NOTE: Some of the 1st clutch disc springs are not staked. If the disc spring is not staked, install it in step 10.
3. Install new O-rings on the piston.
