TL V6-3206cc 3.2L SOHC MFI (1998)
Mainshaft: Service and Repair
Sealing Rings Replacement
NOTE:
-
The sealing rings (37 mm and 42 mm) are synthetic resin with chamfered ends. Check conditions of the sealing rings. Replace the sealing rings
only if worn, distorted or damaged.
-
Apply all parts with ATF during assembly.
1. Squeeze the sealing ring together slightly before installing for better fit.
2. Install new sealing rings on the mainshaft.
3. After installing the sealing rings verify the following:
-
The sealing rings are fully seated in the groove.
-
The sealing rings are not twisted.
-
The chamfered ends of the sealing ring are properly joined.
