TL AWD V6-3.7L (2010)
Alignment: Service and Repair
Wheel Alignment
NOTE: After adjusting the wheel alignment on a model with SH-AWD, do the VSA sensor neutral position memorization See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Programming and Relearning/VSA Sensor Neutral Position Memorization.
The suspension can be adjusted for front and rear toe.
Pre-Alignment Checks
For proper inspection and adjustment of the wheel alignment, do these checks:
1. Release the parking brake to avoid an incorrect measurement.
2. Make sure the suspension is not modified.
3. Make sure the fuel tank is full, and that the spare tire, the jack, and the tools are in place on the vehicle.
4. Check the tire size and tire pressure.
5. Check the runout of the wheels and tires See: Wheels and Tires/Wheels/Testing and Inspection.
6. Check the suspension ball joints (Raise and support the vehicle See: Vehicle Lifting/Service and Repair. Hold a tire with your hands, and move it
up and down and right and left to check for movement).
