TL AWD V6-3.7L (2010)
Headlamp Washer Switch: Testing and Inspection
Headlight Washer Switch Test/Replacement
Canada models with SH-AWD
1. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
2. Disconnect the 6P connector (A) from the headlight washer switch (B).
3. Check for continuity between the terminals in each switch position according to the table.
NOTE: Make sure the correct test lead (+ or -) is placed on the terminal.
4. If the continuity is not as specified, replace the switch.
5. Install the switch in the reverse order of removal.
