TL FWD V6-3.5L (2009)
Traction Control Switch: Testing and Inspection
VSA OFF Switch Test
1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
2. Remove the driver's dashboard undercover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation
3. Push out the VSA OFF switch (A) from the back of the instrument panel.
4. Disconnect the VSA OFF switch 5P connector (B).
5. On the switch side, check for continuity between the VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when
the button is pressed, and no continuity when the button is released.
6. Install the VSA OFF switch in the reverse order of removal.