TL FWD V6-3.5L (2009)
8. Install a new gasket (A) on the transmission housing, and install the 8 x 34.5 mm ATF joint pipe (B) with the filter end into the transmission
housing and the 8 x 25.2 mm ATF pipe (D).
9. Install new O-rings (E) over the ATF joint pipes.
10. Install A/T clutch pressure control solenoid valve C.
11. Check the connector for rust, dirt, or oil, then connect the connector securely.
12. Install the air cleaner assembly. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service
and Repair
13. Do the battery installation procedure. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement