TSX L4-2.4L (2005)
^
If the name is MITSUBA, and the vehicle is not shown as eligible on a VIN status inquiry, go to step 6.
^
If the name is MITSUBA, and the vehicle is shown as eligible on a VIN status inquiry, go to step 4.
NOTE:
MITSUBA may be printed upside down.
4.
Remove the relay.
NOTE:
Since the relay will not be reused, it's OK to remove it with pliers.
5.
Press the new relay into place on the fuse/relay box.
6.
Reinstall the left kick panel and the left front door sill trim.
7.
Center-punch a completion mark above the third character of the engine compartment VIN.
Disclaimer