ZDX V6-3.7L (2010)
Yaw Rate Sensor: Service and Repair
Yaw Rate-Acceleration Sensor Replacement
NOTE:
-
Do not damage or drop the sensor as it is sensitive.
-
Do not use power tools.
1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
2. Remove the center console trims on both sides See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Center Console Removal/Installation.
3. Disconnect the yaw rate-acceleration sensor 4P connector (A), then remove the yaw rate-acceleration sensor (B).
4. Install the yaw rate-acceleration sensor in the reverse order of removal.
5. Do the VSA sensor neutral position memorization See: Antilock Brakes / Traction Control Systems/Testing and Inspection/Programming and
Relearning/VSA Sensor Neutral Position Memorization.
6. Do the yaw rate-acceleration neutral position memorization for SH-AWD system See: Testing and Inspection.
