ZDX V6-3.7L (2010)
Tail Lamp: Service and Repair
Inner Taillight Replacement
Inner Taillight Replacement
1. Open the tailgate.
2. Remove the tailgate lower trim.
3. Remove the rear license trim.
4. Disconnect the connector (A) from the inner taillight (B).
5. Remove the four nuts (C), then remove the inner taillight.
6. Inspect the gasket; replace it if it is distorted or stays compressed.
7. Install the inner taillight in the reverse order of removal, and tighten the nuts to 5 N-m (0.5 kgf-m, 4 lbf-ft).
