ZDX V6-3.7L (2010)
Blind Spot Module: Service and Repair
BSI Cover Replacement
BSI Cover Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the rear bumper See: Body and Frame/Bumper/Rear Bumper/Service and Repair.
2. Remove the BSI cover (A).
1. Left side: Release the harness holder (B).
2. Detach the clip and remove the nut.
3. Install the cover in the reverse order of removal, and note these items:
-
If the clip is damaged or stress-whitened, replace it with a new one.
-
Push the clip into place securely.
