ZDX V6-3.7L (2010)
Control Unit: Service and Repair
SH-AWD Control Unit Replacement
NOTE: The SH-AWD control unit must be initialized after replacement, otherwise the SH-AWD system will not function.
1. Remove the rear side trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim
Removal/Installation - Rear Side Area.
2. Remove the SH-AWD control unit (A).
3. Disconnect the SH-AWD control unit connectors (B).
4. Install the SH-AWD control unit in the reverse order of removal.
5. Do the SH-AWD control unit initialization See: Testing and Inspection/SH-AWD Control Unit Initialization.
