100 Quattro Sedan L5-2309cc 2.3L SOHC (NF) (1989)
/Page-1486002.png)
measurement B (outside dimension)
measurement A (inside dimension)
must be 17.2-18.8 mm
If NO
^
remove drive plate
^
remove shim 2
After checking/adjusting
^
use locking compound on drive plate bolts at crankshaft
^
tighten drive plate to 60 Nm (44 ft lb) plus 1/4 turn (900)
NOTE
Revised tightening torques for 5- and 6-cylinder engines (mounted to compatible transmissions) are illustrated in "Engine/Transmission, Mounting".
