100 Quattro Sedan L5-2309cc 2.3L SOHC (NF) (1989)
Flex Plate: Technical Service Bulletins
097, 01K, 01F Trans./5- and 6-Cylinder Engines
097, 01K, 01F TRANSMISSIONS/5- AND 6-CYLINDER ENGINES
Installing
^
install drive plate along with disc 2 and shim 1 (two shim thicknesses available)
^
disc 2, Part No. 035 105 303A
^
shim 1, Part No. 054 105 301 (3.0 mm)
^
shim 1, Part No. 054 105 303 (4.0 mm)
CAUTION
Part numbers are for reference only. Always check with your Parts Department for latest information.
^
tighten drive plate, only to 30 Nm (22 ft lb), before checking/adjusting
CHECKING/ADJUSTING
^
check dimension (a) at three sites along circumference, and calculate average value
Vehicles with 097 transmission
^
dimension (a) range = 21.3 - 22.9 mm
Vehicles with 087, 01F, or 01K transmissions
^
dimension (a) range = 18.1 - 19.7 mm
If NO
^
remove drive plate
^
install sufficient shim thickness to arrive at dimension a
^
select shim from specified part numbers
After checking/adjusting