100CS Quattro Wagon V6-2.8L (AAH) (1992)
Arm Rest: All Technical Service Bulletins
Front Seat Back Armrest - Broken Weld Nut
Group: 72
Number: 93-01
Date: August 31, 1993
Subject:
Front seat back armrest broken weld nut
Model(s):
All models
1992 m.y.
Condition
The welded nut that secures the armrest to the left front seat frame breaks.
Service
Recommended procedure:
-
Remove left front seat back cover to gain access to welded nut
-
If still attached, remove nut from seat frame using pliers or chisel and hammer
-
If armrest bolt is stripped or bent, replace with:
^
Part No. N 100 627 01
(for armrests without telephone)
^
Part No. N 044 731 1
(for armrests with telephone)
-
Position armrest in place and fasten with:
^
Part No. N 01 1 184 9 (8 mm lock nut)
^
Part No. N 904 527 02 (10 mm flat washer)
-
Install seat back cover
CAUTION
Part numbers are for reference only. Always check with your Parts Dept. for latest information.
Warranty Labor Code
72 19 21 A
Diagnosis
Repair
Quality