100CS Quattro Wagon V6-2.8L (AAH) (1992)
Sunroof / Moonroof Panel: Service and Repair
Sunroof headliner panel, removing and installing
Removing
-
Open sliding roof approx. 10cm (3.9 in.) toward rear.
-
Spread retaining clips on left and right and slide sliding roof headliner toward rear.
Note: Illustration shows retaining clips from inner side of sliding roof headliner.
-
Close roof.
-
Unscrew screws -1-, -2- and -3- completely from tilt mechanism on both sides.
Tightening torque: 4.0-5.0 Nm (35-47 in lb)
-
Lift out roof panel upward.
-
Remove sliding roof headliner.
Note: Headliner can also be removed without removing sliding roof panel - proceed as follows: