audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for Housing Assembly HVAC: > < Heater Core|Locations|Page 5245
Page 1
background image

Housing Assembly HVAC: Customer Interest
A/C - Condensation in Ventilation System & Footwell

Group: 87

Number: 93-02

Date: April 30, 1993

SUBJECT: 
Condensation in ventilation system and footwell

MODEL(s): 
80, 90, 100, 54, V8       From 1991 m.y.

CONDITION

Condensation collects in ventilation system and drips into footwell area because evaporator water drain valve or hose is kinked, incorrectly routed, not
properly attached or blocked by dirt/wax.

PRODUCTION

Different grease used at assembly for easier installation of drain hose; improved inspection at assembly.

1991 80/90/Coupe Quattro
As of production date 02/91
VIN: 
8A MA 190350 (80/90)
8B MA 008 387 (Coupe Quattro)

1991 V8
New assembly instructions provided at factory: 
As of production date 10/91
VIN: 4C MN 008 387

1992 80, 100, 54, V8 (USA only)
1993 100, 54, V8 (Canada only)
Improved production method:
As of production date 10/91 (USA only)
VIN: 8C NA 029 032 (80)
4A NN 023 597 (100/S4)
4A NA 043 684(100/S4)
4C NN 000 835(V8)
As of start of production 1993 m.y. (Canada only)

SERVICE

Evaporator water drain valve and hose, checking

Check water drain valve (arrow) and hose for kinks, proper routing, correct attachment and obstructions.

Remove kinks, reroute hose, reattach valve/hose and/or free obstructions as necessary.

All Technical Service Bulletins for Housing Assembly HVAC: > < Heater Core|Locations|Page 5245