100CS Quattro Wagon V6-2.8L (AAH) (1992)
-
Lower sunvisor and open mirror cover.
-
Using soft cloth to protect sunvisor, pry up at points A with small screwdriver
-
Remove mirror/lens assembly
-
Using digital multimeter Fluke 83 (US1119), check light circuit for continuity.
-
Replace light bulb(s), Part No. N 017 725 2 or repair connectors as necessary.
Note
Microswitch is not available as a replacement part.
CAUTION
PART NUMBERS ARE FOR REFERENCE ONLY. ALWAYS CHECK WITH YOUR PARTS DEPARTMENT FOR LATEST INFORMATION.
-
Inspect light assembly for tight fit in visor.
-
If loose or falling out of sunvisor, reglue back side with adhesive P/N AKD 476 KD5 05 or equivalent.
Note
Additional glue may be added to the open vent holes (arrows) until a bead forms (Version II shown).
-
Reinstall mirror/lens assembly into light assembly, first at points B, then carefully apply pressure at points A and push fully into light assembly.
-
Check illuminated vanity mirror for proper function.