100CS Quattro Wagon V6-2.8L (AAH) (1992)
Toothed Belt: Service and Repair
Camshaft Drive Belt, Assembly Overview
Toothed drive belt and pulley, assembly
CAUTION: Tighten camshaft sprockets after toothed belt tension is adjusted.
Note:
Camshaft holder 3243 must be installed before attaching camshaft sprockets.
1. 70 Nm (52 ft lb)
2. Locking plate
Side with inscribed lettering faces camshaft
3. Camshaft sprocket
Removing, refer to Toothed Belt, Removing and Installing See: Camshaft Drive Belt, Removal and Installation
4. Toothed belt tensioner
45 Nm (33 ft lb)
5. Toothed belt
Removing and installing, refer to Toothed Belt, Removing and Installing See: Camshaft Drive Belt, Removal and Installation
6. Toothed belt cover
7. 10 Nm (7 ft lb)
8. 25 Nm (18 ft lb)