audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Understanding Track Style Wiring Diagrams, Important Stuff !|Page 3566 > < Understanding Track Style Wiring Diagrams, Important Stuff !|Page 3564
Page 1
background image

Fuel Pump Relay: Testing and Inspection

Checking function

Note:

The fuel pump relay is located in the fuse/relay panel, on the left side under the instrument panel.

-

Remove shelf in left front footwell.

-

Remove lower right A-pillar trim.

-

Fold back carpet in right front footwell.

-

Remove cover from electronics box.

Central Electronics Box

-

Remove HO2S circuit breaker -2- (-S73- in brown holder) and injector valve circuit breaker -3- (-S72- in red holder).

-

Remove fuse 17 from fuse holder.

-

Connect US 1115 LED tester or equivalent between Ground (GND) and one terminal for fuse 17, using adapter cables from VW 1594
connector test kit.

-

Operate starter briefly.
^

Fuel pump relay must be activated (can be felt and heard)

^

LED tester must light up

If fuel pump relay is NOT activated:

-

Check activation of fuel pump relay.

If LED tester does NOT light up:

-

Repeat test on other terminal for fuse 17. 

If LED tester still does NOT light up:

Central Electric Panel With Detail Of Relay Position 6

-

Check wiring connection for continuity between fuse 17 and terminal 30 at relay position 6 per wiring diagram.

-

Repair open circuit in wiring, if necessary.

Understanding Track Style Wiring Diagrams, Important Stuff !|Page 3566 > < Understanding Track Style Wiring Diagrams, Important Stuff !|Page 3564