100CS Quattro Wagon V6-2.8L (AAH) (1992)
Clockspring Assembly / Spiral Cable: Service and Repair
NOTE: When removing or installing the airbag spiral spring, the wheels should be in the straight-ahead position.
-
Disconnect battery ground cable.
-
Disconnect airbag power supply connector.
-
Remove airbag unit and steering wheel.
-
Remove screws (arrows).
-
Disconnect lock plate -A-.
-
Remove airbag spiral spring from behind.
NOTE: When removed, airbag spiral spring must not be twisted.
-
Install all components in reverse order of removal.