100S Quattro Wagon (Canada) V6-2.8L (AAH) (1992)
Cellular Phone: Technical Service Bulletins
A-Pillar Microphone, Installing
A-PILLAR MICROPHONE, INSTALLING
Note
The left A-pillar trim on some vehicles does not have the hands4ree microphone mount and bezel. On these vehicles install a new A-pillar trim
having these provisions.
^
pull down left front inner door molding at A-pillar
^
using a flat blade screwdriver, carefully pry off A-pillar trim clips
^
remove A-pillar trim
If new A-pillar trim is installed,
^
transfer clips from old trim to new trim
Note
Illustration 91-A039 shows a microphone assembly mounted in the center of the A. pillar trim. This location has changed and the microphone mount
is now near the top the trim.
^
install microphone assembly 1 onto A-pillar trim 2 with two screws
^
connect microphone connector to harness connector on A-pillar
^
reinstall A-pillar trim
^
reinstall left front inner door molding
CAUTION
DO NOT attempt to use the phone. Always register a new transceiver with the Cellular Telephone Company before placing a call.
^
check phone by pressing Pwr button on handset
^
phone must switch ON