100S Quattro Wagon (Canada) V6-2.8L (AAH) (1992)
Trip Computer: Technical Service Bulletins
Board Computer, Range Calibration
Set range calibration ONLY after replacing the board computer (printed circuit).
Note
The board computer calculates fuel consumption based on 10 I/100 km regardless if the computer display is in US or metric measurement units.
^
switch ignition OFF
^
remove connector (arrow) from fuel gauge sending unit
^
using jumper wires, connect test unit VW 1301 to fuel gauge sending unit connector as shown
^
set test unit VW 1301 to 250
^
press and hold RESET button
^
switch ignition ON