100S Quattro Wagon (Canada) V6-2.8L (AAH) (1992)
Trip Computer: Testing and Inspection
Fuel Injection Code, Checking
-
Run engine at 3000 RPM for approximately 30 seconds.
-
Switch engine and ignition OFF.
-
Press and hold RESET button.
-
Switch ignition ON (while holding RESET button down).
-
Press lower function selector switch and hold down.
-
"a" and appropriate fuel injection code displayed:
-
Code F for Multiport Fuel Injection
If the correct fuel injection code is displayed:
-
Switch ignition OFF.
-
Check average speed display, next page.
If the correct fuel injection code is NOT displayed:
-
Check coding connector for proper application.
-
Check fuel consumption signal.