100S Quattro Wagon (Canada) V6-2.8L (AAH) (1992)
Air Door Actuator / Motor: Service and Repair
Temperature Regulator Flap Motor, Replacement
Removing and installing temperature regulator flap motor -V68- with position sensor -G92-
-
Remove plenum tray.
-
Remove entire windshield wiper assembly.
-
Remove cover -A-.
-
Remove screws -C-.
-
Remove temperature regulator flap motor.
Install in reverse order of removal noting the following:
-
Ensure gasket -B- is properly installed on cover -A-.
-
Check temperature flap for ease of movement before installing flap motor.