100S Quattro Wagon (Canada) V6-2.8L (AAH) (1992)
Air Bag: Service and Repair
Removing airbag unit 4
-
Disconnect battery ground strap
-
Remove Torx® bolts from steering wheel using Snap-C tool FTXL3OA or equivalent
-
Tilt airbag unit downward
-
Unlatch safety clamp -3-
-
Disconnect harness connector for airbag unit -6-
-
Remove airbag unit
To install:
-
Install airbag unit mounting screws by hand
-
Tighten right screw, then left screw, to specifications
5 - Torx® screw - 0.6 Nm (53 in lb.)