100S Quattro Wagon (Canada) V6-2.8L (AAH) (1992)
/v6-2.8l_(aah)/Page-301001.png)
Knock Sensor: Technical Service Bulletins
Knock Sensor - Revised Torque Specification
Group: 28
Number: 93-01
Date: March 15, 1993
SUBJECT:
Knock Sensor Torque
MODEL(s):
100 w/Engine Code AAH
From 1992 m.y.
The knock sensor torque as specified on page 28-100-1 of the Audi 100 (04) Repair Manual (Fiche number: W42 544 192 F2) is Incorrect.
The correct torque is: 20 Nm (15 ft lb)
CAUTION
The specified tightening torque is critical to the proper function of the knock sensors.
The Repair Manual will be corrected to reflect this change in the next update.
