100S Quattro Wagon (Canada) V6-2.8L (AAH) (1992)
9. Safety plate
Always replace
10. Carrier
Always install in both holes of boot
11. Nut
40 Nm (30 ft lb)
12. 0-rings/copper seals
Always replace
13. Banjo bolts
40 Nm (30 ft lb)
Note different types of 0-rings and copper seals
14. Pressure hose
Connect to rotary slide valve housing
Note different versions with 0-rings and copper seals
15. Return hose
Connect to rotary slide valve housing
Note different versions with 0-rings and copper seals
16. Washer
17. Self-locking nut
Always replace
25 Nm (18 ft lb)
18. Steering column
Attach to universal joint
19. Universal joint
Remove before removing steering gear
Place on steering pinion and fasten with locking bolt
20. Locking bolt
Always replace
21. Washer
22. Self-locking nut
Always replace
25 Nm (18 ft lb)
23. Instrument panel seal
Remove before removing steering gear
Ensure correct seat on instrument panel
24. Bolt
50 Nm (37 ft lb)
25. Wheelhousing, left
26. Tie rod, left
27. Threaded piece
Adjust toe on both tie rods
28. Tie rod end, left
Removing, Fig. 1
29. Lock nut
50 Nm (37 ft lb)