100S Quattro Wagon (Canada) V6-2.8L (AAH) (1992)
Seals and Gaskets: Service and Repair
Right Side Seal
COMPONENT NOTES AND INFORMATION
1
Right flanged shaft
2
Oil seal
-
For right flanged shaft
3
Oil seal
-
For left flanged shaft
-
Replacing, refer to Left Side Seal.
4
Left flanged shaft
5
Magnetic ring for speedometer Vehicle Speed Sensor (VSS)
-
Replacing, refer to Instrument Panel, Gauges and Warning Indicators.
6
Speedometer Vehicle Speed Sensor (VSS)
-
Replacing, refer to Instrument Panel, Gauges and Warning Indicators
PROCEDURE
NOTE:
^
Refer to General Repair Instructions.
^
Transmission installed
-
Remove three way catalytic converters.
-
Disconnect drive axle from flanged shaft.
-
Turn steering to full lock and tie up drive axle.
-
Remove mounting screw for flanged shaft (arrow).
To loosen the mounting screw, screw two bolts in the flanged shaft and counter-hold with assembly lever.
-
Place oil drip tray below transmission.
-
Remove flanged shaft.