200 Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1989)
/Page-131005.png)
Air Bag Components Illustration/Location
Important Repair Steps And Sequence
^
Record preset radio stations and obtain radio code.
^
Disconnect battery and current supply (wiring separator) to air bag.
^
Disconnect and remove power reserve unit and voltage transformer and discard both items (no longer required).
^
Replace air bag sensor module and bracket.
^
Reconnect battery and current supply to air bag.
^
Perform functional check.
Points Of Caution/Hints
-
Always disconnect battery ground cable and reserve power unit prior to starting any work on an air bag system.
-
Use adequate lighting when performing this recall work.
-
Do not activate ignition key with air bag components disconnected.
-
Do not attempt using a "chisel/hammer" when loosening mounting screws.
-
Work with a test lamp; a voltmeter or an ohmmeter is not permitted.
-
Checking/testing is to be done ONLY with a VAG 1551 scan unit with new part installed.
