4000CS Quattro L5-2144cc 2.14L SOHC (JT) (1986)
Brake Bleeding: Service and Repair
Disc Brakes
Whenever possible, use pressure bleeder. To bleed brake system, use bottle with a transparent hose attached so that brake fluid can be checked for air
bubbles. Do not re-use fluid removed from reservoir. Moisture or other contaminants in fluid can cause brake performance problems.
NOTE:
After replacing/removing brake master cylinder, clutch master cylinder must be bled before bleeding brakes.
1. Brake pressure regulator.
2. Right rear caliper.
3. Left rear caliper.
4. Right front caliper.
5. Left front caliper.
After bleeding, fill reservoir only to maximum mark.