4000,S L4-1715cc 1.7L SOHC (WT) (1982)
2. O-ring*
^
always replace
^
color coded: green
3. Pinion shaft seal*
^
removing, Fig. 3
^
installing, Fig. 4
^
with double lip around bead for pinion shaft, Fig. 2
4. Bolt with collar*
^
30 N-m (22 ft.lb.) plus additional 1/8 turn (45~)
^
use correct bolt only
5. Sleeve*
^
replace previously used pins
^
installation depth, Fig. 7
6. O-ring*
^
for oil channel
^
always replace
^
color coded: green
7. O-ring*
^
always replace
^
color coded: green
8. Final drive housing
^
coat sealing surface and chamfered edge for pinion shaft cover with Part No. AMV 188 200 03, Fig. 5
9. Pinion shaft*
^
with bead for double-lip seal, Fig. 1
Fig. 1 Revised pinion shaft, identifying
A = revised pinion shaft with bead (arrow) for double-lip seal
B = previous pinion shaft without bead