4000S Quattro (Canada) L5-2144cc 2.14L SOHC (JT) (1986)
/l5-2144cc_2.14l_sohc_(jt)/Page-2468001.png)
Brake Pad: Service and Repair
Girling Type
CAUTION:
With this procedure brake fluid is pushed into reservoir. To prevent overflowing, siphon some fluid out with an appliance which is used for this
purpose only.
1. Raise and support vehicle, then remove rear wheels.
Rear Brake Caliper Guide Pin
2. Using open end wrench to hold guide pin heads, remove caliper mounting bolts.
3. Remove caliper, then the brake pads.
Rear Brake Caliper
4. Screw piston into housing using a suitable allen wrench by turning clockwise while pushing in firmly.
Rear Brake Caliper and Carrier
