5000 Turbo L5-2144cc 2.14L SOHC Turbo (WK) (1982)
Piston, Installing
5. Install replacement piston seal into caliper bore. Lubricate seal with clean brake fluid.
6. Lubricate piston and caliper bore with clean brake fluid, then press piston down while screwing into bore as far as possible.
7. Position caliper with bleeder screw facing upward, then connect bleeder hose and open bleeder screw. Fill caliper with clean brake fluid through
bleeder screw, then close bleeder valve.
8. After installing caliper on vehicle, bleed brake system before road testing.