5000CD Turbo (Canada) L5-2226cc 2.22L SOHC Turbo (MC) (1988)
If the strainer cannot be thoroughly cleaned, or is damaged, replace it with a new part. Use the newer version strainer, Part No. 443 422 385A.
-
install reservoir assembly in vehicle and attach hoses and lines disconnected during removal
Hydraulic pump, priming
Note
On new or replacement pumps, read procedure described on pink tag supplied in the box.
CAUTION
Part Numbers may be different for different models, model years and options. Always consult with the Parts Dept. for correct application.
-
assemble pump brackets and pulley to new pump
CAUTION
Use only hydraulic fluid, Part No. G 002 000.
-
pour some hydraulic fluid into outlet port (arrow A) and rear chamber (arrow C) of new pump
-
fill suction chamber (arrow B) with hydraulic fluid
-
rotate pump slowly by hand through four to five complete revolutions (fluid will be discharged at arrow C). Keep suction chamber (arrow B) full
of fluid
-
install new hydraulic pump in vehicle
-
separate pump to accumulator line at fitting and check if damper hose is missing or restricted
-
remove banjo bolt at accumulator and replace
-
reassemble accumulator line and connect to pump